I’m in a rental right now with a useless landlord, so I’m trying to fix the problem myself (or at least find the cause). My home’s central air AC unit is working, but doesn’t seem to be working well. There is cool air coming from the vents, but its less than I would expect, and when its 80f/27c outside, its rarely more than a single degree cooler. I’m looking for ideas to track down the problem. In particular, between the landlord’s neglect and the last tenant’s seemingly willful destruction I expect it’ll be something maintenance related.

So far I have checked:

  • The unit size relative to the property (its about 2.5 tons for a 2,500 ft² property) which the internet seemed to say was fine. That said, its a bungalow with no attic and high-cielings, so Im not sure if that could have enough effect to account for this.

  • Intakes and outlets inside the out aren’t blocked by furnature (although what I can see looking into them looks pretty dirty)

  • I tried removing the furnace filter (which, from my understanding, is also used by the AC inside the house) temporarily, although didn’t notice a significant difference.

  • I checked the cooling fins on the unit outside the house for obstructions, but there was little more than a bit of webs

I’m not an expert on these things at all, but is there anything else I can check or try?

Edit: unfortunately there is some condensation and frost on the coil box, so sounds like its a leak. Guess I’m looking at a fight with my landlord.

  • StrawberryPigtails@lemmy.sdf.org
    link
    fedilink
    arrow-up
    15
    ·
    3 days ago

    134a is for automotive ac units. Unless something has changed recently, household hvac systems use a different type. It used to be R22 for both, but that was a long time ago. Turned out freon (R22) was bad for the environment.

    • grue@lemmy.world
      link
      fedilink
      English
      arrow-up
      11
      ·
      3 days ago

      They’re pretty much all bad for the environment, just to different degrees. Even the “greener” refrigerant choices (which have suboptimal thermodynamic properties, BTW) are things like ammonia, carbon dioxide and propane.

      Point is, don’t be cavalier about letting your refrigerant escape even if it isn’t R22.

    • db2@lemmy.world
      link
      fedilink
      arrow-up
      12
      ·
      3 days ago

      Freon is an actual trade name, like Kleenex it wasn’t defended rigorously and now it’s used for all refrigerants generically. FYI