• Fluba@lemdro.id
    link
    fedilink
    arrow-up
    33
    ·
    1 year ago

    Yup. Usually the device being charged can scale down the power throughput so it’s not getting 60W+ if it’s not able to handle it.

    • ladicius@lemmy.world
      link
      fedilink
      arrow-up
      31
      ·
      1 year ago

      That’s the core of charging management: The charged device controls the process, not the charger.

      Anything else won’t work if you think about it.

    • zero_iq@lemm.ee
      link
      fedilink
      arrow-up
      25
      arrow-down
      1
      ·
      edit-2
      1 year ago

      In this thread: people who don’t understand what power is.

      Power isn’t something that is “pushed” into a device by a charger. Power is the rate at which a device uses energy. Power is “consumed” by the device, and the wattage rating on the charger is a simply how much it can supply, which is determined by how much current it can handle at its output voltage. A device only draws the power it needs to operate, and this may go up or down depending on what it’s doing, e.g. whether your screen is on or off.

      As long as the voltage is correct, you could hook your phone up to a 1000W power supply and it will be absolutely fine. This is why everything’s OK when you plug devices into your gaming PC with a 1000W power supply, or why you can swap out a power-hungry video card for a low-power one, and the power supply won’t fry your PC. All that extra power capability simply goes unused if it isn’t called for.

      The “pushing force” that is scaled up or down is voltage. USB chargers advertise their capabilities, or a power delivery protocol is used to negotiate voltages, so the device can choose to draw more current and thus power from the charger, as its sees fit. (If the device tries to draw too much, a poorly-designed charger may fail, and in turn this could expose the device to inappropriate voltages and currents being passed on, damaging both devices. Well designed chargers have protections to prevent this, even in the event of failure. Cheap crappy chargers often don’t.)

    • SaltyOnMobile@feddit.de
      link
      fedilink
      arrow-up
      13
      ·
      1 year ago

      Not usually, but all the time. It’s part of the USB standard to negotiate the power that the device and even the cable can handle.

      • jsveiga@sh.itjust.works
        link
        fedilink
        arrow-up
        1
        arrow-down
        5
        ·
        1 year ago

        When all USB could do was 5V I already didn’t trust any charger but mine - I couldn’t believe people dared to connect their devices to charge into any public USB chargers.

        Now that they can go up to 20V, and we have to trust everything will work with the negotiation and wiring to get the right voltage, it’s even scarier!

        • Kalash@feddit.ch
          link
          fedilink
          arrow-up
          13
          arrow-down
          1
          ·
          1 year ago

          Will go up to 48V (240W) with the next USB-PD standard.

          But as long as it’s reputable hardware that actually implements the starndard, I’m not too worried.

          • jsveiga@sh.itjust.works
            link
            fedilink
            arrow-up
            2
            ·
            1 year ago

            48V and we’re back to POTS (plain old telephone system) voltages :-)

            I agree, but that’s the problem even from reputable sources, glitch happens. Old 5V-only chargers would need much more things to go wrong to fry our devices. A 20V (or 48V !) one is just a small (sw or hw) glitch away to zap a device that doesn’t support such voltages.

            • Kalash@feddit.ch
              link
              fedilink
              arrow-up
              3
              ·
              1 year ago

              The USB standard is usally really robust and the changes of SW errors is small. If you have a good brand laptop it will probably come with very reliable charger as well. I really don’t worry about it.

    • ciko22i3@sopuli.xyz
      link
      fedilink
      arrow-up
      4
      ·
      1 year ago

      Usually

      Is there some exception to USB-C im not aware of? Am i putting myself in danger using high power chargers to charge low power devices?

  • DacoTaco@lemmy.world
    link
    fedilink
    arrow-up
    17
    ·
    edit-2
    1 year ago

    I am a usb-pd believer. My phone, laptop, soldering iron, … All usb type-c with usb-pd capability, all running from my laptop charger that can do 5,12,19 and 20v

  • ɐɥO@lemmy.ohaa.xyz
    link
    fedilink
    arrow-up
    11
    ·
    1 year ago

    Im charging everything with my Steam Deck’s charger. Having to take care of only one charger makes life a lot easier

  • NaN@lemmy.blahaj.zone
    link
    fedilink
    English
    arrow-up
    10
    ·
    1 year ago

    Yes, but my phone negotiates a slower speed with the laptop charger than its own.

    I’ve charged numerous devices with the Nintendo Switch charger too.

    • jasondj@ttrpg.network
      link
      fedilink
      arrow-up
      1
      ·
      1 year ago

      I’ve been paranoid to do that since I’d heard that the switch charger is non-standard, but that may just be Nintendo propaganda.

      • DacoTaco@lemmy.world
        link
        fedilink
        arrow-up
        6
        arrow-down
        1
        ·
        1 year ago

        No, this is correct. The switch and adaptor use voltages that arent standard to the usb-pd protocol. However, using the adaptor on your phone should be fine as both need to accept the voltages before it switches

      • Echo Dot@feddit.uk
        link
        fedilink
        arrow-up
        4
        ·
        1 year ago

        It doesn’t matter, USB-C won’t use a voltage that’s in excess of the voltage the receiving device can accept, so even if the cable is theoretically capable of a higher voltage it won’t matter. Just like you can’t overcharge your phone battery anymore, the charging will just stop automatically at 100%.

        The switch cable won’t carry data which is odd, but it won’t break your phone and you probably don’t need data most of the time anyway.

  • JC1@lemmy.ca
    link
    fedilink
    arrow-up
    9
    ·
    1 year ago

    Yep, best thing ever, I bought a GaN charger, 100W 3 USB-C and 1 USB-A. It’s small and light. I carry it around everywhere. I even bring it at my client’s office instead of the power brick they gave me since it’s so small.

    Just make sure you have plenty of wattage. For instance, my job laptop uses a 65W adapter. If I want to charge this at the same time as my phone, I would need at least 90W to cover everything (65+25). So I have more power than necessary In order to be able to charge everything at once. Also, make sure to. Heck the adapter on how it distributes power trough the ports. My configuration could not be supported on a 3 port if for example they decided to split the power 55+45. But mine is 65+35 with 2 ports so I’m fine.

  • Willem@kutsuya.dev
    link
    fedilink
    arrow-up
    7
    ·
    1 year ago

    Having my mouse (Logitech mx something) currently on my 135W Lenovo usbC laptop charger with no problems. I try to charge everything with type C usb-pd.

  • callyral@kbin.social
    link
    fedilink
    arrow-up
    5
    ·
    1 year ago

    my laptop charger is round and my phone is usb-c

    my laptop has usb-c but it doesn’t seem to charge it

    • Eavolution@kbin.social
      link
      fedilink
      arrow-up
      3
      ·
      1 year ago

      I have a dell laptop. Barrel charging port, but the USB-C port will charge it too… Just very slowly with a 33W phone charger instead of the 130W laptop charger.

  • Inktvip@lemm.ee
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    I’ve got wireless charging pads/stations/car holder everywhere. Super convenient to just drop your phone down and keep it charged.

    My phone’s usb C port got so loose after ~2.5 years that cables would just fall out, so I fully committed to QI charging to preserve whatever is left of that port for things like data transfer.

  • AA5B@lemmy.world
    link
    fedilink
    arrow-up
    3
    ·
    1 year ago

    I would … after I guy this year’s iPhone … and a new laptop.

    Seriously, though, why not? I did get my kid one of the Anker gallium arsenide chargers so he could do exactly that

    But I’ll also go the other way - who charges their phone on the lowest power charger? I have a dual charger with total 2.1a, and it fully charges both my phone and watch overnight

    • anguo@lemmy.ca
      link
      fedilink
      arrow-up
      7
      arrow-down
      1
      ·
      1 year ago

      I mean, for overnight charging you could probably go as low as 0.5A. Slow charging is better for your battery in the long run, afaik.

      • owatnext@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        I have ACCA installed on my rooted Android phone and have it set to charge at 700mAh, to go easy on the battery. So no matter what charger I use, it always charges slowly lol.