As a USAian I would be grateful if someone could provide a link to this section of the ceremony because it looks really cool but the split audio makes it tough to watch with my wife (and I don’t really need to see the shit NBC coverage in the corner).
At least on Peacock, NBCs streaming platform that claims it has all streams that are being broadcast in the US, there was only the main NBC feed. They do show world feeds during the day of various sports but usually opening and closing ceremonies we are stuck with the truly terrible broadcasts NBC puts together.
From my reading this is misleading at best and likely wrong. I don’t work with CrowdStrike Falcon but have installed and maintained very similar EDR tools in enterprise environments and the channel updates referenced are the modern version of definition updates for a classic AV engine. Being up to date is the entire point and so typically there are only global options to either grab those updates from the vendor or host them internally on a central server but you wouldn’t want to slow roll or stage those updates since that fundamentally reduces the protection from zero days and novel attacks that the product is specifically there to detect and stop. These are not engine updates in that they don’t change the code that is running, they give the code new information about what an attack will look like to allow it to detect malicious activity as soon as CrowdStrike knows what the IoCs look like.
In this case it appears that one of these updates pointed to a bad memory location which caused the engine to crash the OS, but it wasn’t a code update that did it (like a software patch). That should have been caught in QA checks prior to the channel update being pushed out, but it’s in CrowdStrikes interest to push these updates to all of their customers PCs as quickly as they can to allow detection of novel attacks.
For me as the driver of not one of these cars, I think the driver monitoring and sheeting is perhaps one of the most important parts of these systems. I 100% want your car to scream at you for not paying attention while use the driver assist features because it’s such a common and easy thing to do (if it works 99 times without issues, human nature is to assume it will work that 100th time, so checking that email from work real quick is probably fine). When the consequences of a driver failing to post attention while using these systems is potentially other people dying in a horrific crash, your discomfort at an alert because you happen to be a perfect driver that never does other things in the car while driving doesn’t matter.
Surely not Maslow or MB, both have so many exception’s and so little real science behind them they just aren’t really useful things for the majority of people.
It’s not as rare as you may think. I used to work at a weather service office located right near the end of one of the runways at IAD and it would happen a few times a day if the airport was busy and the winds were such that they were coming in from our side.
The reality is they may not know exactly what was obtained, but they do know it wasn’t anything they don’t collect (like DOB, SSN, etc listed in the message). Instead of looking at this purely as a CYA message, instead looking at it as informing you as soon as they had any idea your information may have been impacted instead of waiting weeks/months to inform you. Don’t let perfect be the enemy of good.
A lot of these depend on the model and where it’s installed (geographically and within the house). In many areas of the US, there is a drain in the floor near all water heaters as a matter of code, you can drain condensate directly to that (and unlike gas appliances, the condensate is clean and does not need treated to go in household drains). I honestly think the noise concern is hugely overblown and used as an excuse for people that don’t like change. Sure it exists, but if your water heater is in the basement or garage like the majority are at least in my areas of the US, you’ll never notice it. I also look at the cooling air as a benefit for at least half the year, I can close all the vents in our basement for the whole spring/summer and it’s super comfortable. In the winter it’s a tad chilly, but not uncomfortable. Drying the air is also great for our basement, it’s literally a dehumidifier in what’s usually a pretty damp location for many people. Ours (a rheem unit) has a flimsy plastic air filter you vaccuum off once a year as well so not really a huge deal. I think most are like this.
I agree that folks should do their homework and understand what they are getting. Heat pump water heaters are great, but are overpriced at the moment. Even with electric company rebates and a tax credit it cost more than a decent gas replacement would for us. It’s likely to only pay off because we have solar and so don’t really pay for electricity for a large chunk of the year. But I expect costs to come down over the next 5-10 years as these become the go to for most electric installs (and with fewer new gas hookups in new and renovated buildings that’s like to be most installs). Once these hit that $700-$1000 price point there’s really no good reason most people shouldn’t default to installing one.
They almost always have two high wattage resistive elements installed like a traditional electric water heater which require the 220v/30a circuit. The compressor runs on 220v but sips almost no real current while running.
YMMV of course, and will highly depend on how many people are in your house and how you use hot water, but a 50 gallon heat pump water heater easily supplies a dishwasher and two long showers with 1/3 of a tank of available water left in our house (and I take pretty hot showers that are not always as short as they should be). Sure, it takes an hour or two to fully recover but we aren’t ever looking to use much more hot water at one time. If you have a household of four, it may be a bit more of a problem, but then you can easily schedule other hot water uses to happen “off peak” like a dishwasher.
Idk, I DIY swapped out old gas water heater for an electric heat pump water heater heater and it was super straight forward. If you have the plumbing and electrical skills to add a circuit and move your hookups (since on most gas water heaters they are on top and most heat pump water heaters they are on the sides top and bottom), you probably have the skills to safely disconnect and cap off the old gas line. Just be sure to use pipe dope that is rated for gas, and check with soapy water once you pressurize the line again for leaks.
Ours is also Rosie, it just seemed so obvious
I would recommend prowlarr instead of jackett for indexer management, and pihole as at least an additional blocking service but in reality it’s really all you need for use at home. I’d also strongly encourage use of a VPN on your *arr download services. I use a separate box to run Plex and then have my *arrs all running on their own VM inside if it to provide separation and allow be to more easily segregate the network traffic (as someone that doesn’t really know docker that well it “just works” for me. Also probably worth looking at how to store your media on an external target, it’s easy to quickly accumulate 10s of TBs of media and trying to store that all on the server locally is asking for trouble. Better to set everything up on a NAS to start.
Asking broadly like this is akin to asking for a guide on how to cook, it’s generally too broad for there to be a single guide. You first need to figure out what your goals are (you state one already, you’d like it to be externally accessible), determine what services you want to host, and then start looking at how to do so.
The advice I’d give is to start with a solid base, you’ll need something to self host on and it really shouldn’t be the PC you use for other things. Get it setup to run a virtualization OS such as proxmox and use that as your starting point. Then do a lot of reading. I spend probably three to four times as much time reading about the service I’m planning to deploy compared to actually doing the work to deploy it. Lastly, plan. You should have a solid plan in the beginning of how you want your service to work (what will be external vice internal only, how will you setup the networking stack to do that, are you going to have a domain, and will you use subdomains or folders to divide services, what does your IP space look like, will you host your own firewall to make the networking more controlled or fight with your ISPs router, do you want to use docker, kubernetes, or maybe full VMs for each service, do you want/need a UI to manage things from or are you comfortable with CLI, etc). These answers will lead you to guides for various services as well as service specific forums where help is more focused.
I use protonmail with their family plan, it’s not terribly priced when you consider it comes with calendar, vpn, and drive storage as well. The biggest annoyance is probably that you have to use their mobile apps due to the encryption and they are not the greatest, but it does encrypt everything which I find outweighs the forced use of just their app.
It replaces the ad revenue the channel would otherwise have gotten from your view, at a higher rate than an ad impression.
Curious about the ears you have on your 8 port POE switch; I’d love to rack mount mine and get it off my “other stuff” shelf. Are they from UI? Or did you repurpose some from something else?
So you never apply patches or updates, that seems like an odd thing to be proud of but different strokes for different folks I guess.
Backblaze B2. Any software that is S3 compatible can use B2 as the target and it’s reasonably priced for the service. I backup all the PCs and services to a Synology NAS and then backup that to B2 (everything except my Plex media, that would be pricy and it’s easy enough to re-rip from disc if needed).
Link doesn’t work with ad blockers, archive.is link here: https://archive.is/TcDlm