• Chozo@fedia.io
    link
    fedilink
    arrow-up
    47
    ·
    5 months ago

    Instead, TMOS researchers used metasurface-based upconversion technology, which essentially provides an easier pathway for light photons to be processed. The photons travel through a resonant metasurface, where they mingle with a pump beam. The non-local lithium niobate metasurface boosts the energy of the photons, and draws them into the visible light spectrum without the need to convert them to electrons first. It also doesn’t require cryogenic cooling – which reduces ‘noise’ for sharper images in traditional night vision – so can do away with even more of the bulky night-vision goggle mechanics.

    This reads like a Turbo Encabulator script.

      • eronth@lemmy.world
        link
        fedilink
        English
        arrow-up
        13
        ·
        5 months ago

        Depends on your scientific familiarity. Also, part of the turbo encabulator script is that most of the words are not odd, it’s how they’re joined which is odd.

  • Destide@feddit.uk
    link
    fedilink
    English
    arrow-up
    46
    arrow-down
    1
    ·
    5 months ago

    “From evening drives” Bad enough dealing with modern headlights with normal eyes

    • Farid@startrek.website
      link
      fedilink
      English
      arrow-up
      10
      arrow-down
      3
      ·
      5 months ago

      Do modern headlights emit IR? I don’t think so. Which means these IR amplifiers wouldn’t change the intensity of headlights.

      • Death_Equity@lemmy.world
        link
        fedilink
        English
        arrow-up
        10
        arrow-down
        2
        ·
        5 months ago

        IR is heat, so headlights produce a a lot of IR. Laser headlights emit less IR with the visible light, but radiate heat.

        • Farid@startrek.website
          link
          fedilink
          English
          arrow-up
          10
          arrow-down
          1
          ·
          edit-2
          5 months ago

          Well, IR isn’t heat, but it’s associated with it. And since laser and LED lights heat up a little bit, yes, they of course produce a miniscule amount of IR. But it’s pretty much negligible in comparison to their visible spectrum emissions. If you’re already being blinded by the visible range of the laser, the IR part isn’t gonna do much.

            • Farid@startrek.website
              link
              fedilink
              English
              arrow-up
              9
              arrow-down
              1
              ·
              5 months ago

              Fair enough, I was being too vague with my statement. I was implying that they don’t emit much IR, as all bodies above 0 Kelvin do emit it. And LED/laser headlights almost don’t, in comparison to xenon and stuff. I looked up some Xe emission graphs and some even straight up show the peak in near-IR, while laser/LED starts flatting out way before NIR.

        • Farid@startrek.website
          link
          fedilink
          English
          arrow-up
          10
          ·
          edit-2
          5 months ago

          Now that I’ve read my own comment, I see that it came off harsher then I intended it to. Interpret it literally and not like a sarcastic statement.

          Btw, just occurred to me that these would probably not work in a car at all, because regular glass is usually opaque to IR.

          • HelixDab2@lemm.ee
            link
            fedilink
            English
            arrow-up
            4
            ·
            edit-2
            5 months ago

            because regular glass is usually opaque to IR.

            I’m almost 100% positive that this is not correct, because I’ve been driven around by someone wearing PVS-14 NODs with no headlights, on dirt roads, in a commercial van. (Edit - most red dot sights also work very well with NODs, and those have one or two layers of glass, depending on which type of system it is. The sights that don’t work well usually can’t dim the dot enough to avoid massive bloom.) Glass is mostly opaque to thermal though, and a lot of glass significantly reduces UV.

            • Farid@startrek.website
              link
              fedilink
              English
              arrow-up
              2
              ·
              5 months ago

              I can’t say I have any experience with PVS-14 or any Night Optical Devices, but from what I see online, it amplifies certain visible spectrum as well as near-IR. It doesn’t seem to rely on IR much. And red dot sights aren’t even IR are they? At least not entirely, cause you can see them with the naked eye.
              Regarding glass being opaque to IR, apparently, it depends on the type of glass. I just remembered it from a Vsauce video (IIRC) where it was demonstrated to be opaque. But since term IR is vague and doesn’t have super defined borders, and there are different types of glass, yeah, it’s not a certain statement.

              • HelixDab2@lemm.ee
                link
                fedilink
                English
                arrow-up
                3
                ·
                5 months ago

                Okay, so you’re talking about the IR that most people would refer to as thermal, rather than the IR that’s technically NIR, and is used in most image intensification. My mistake; as you say, these things get slippery because most of the time people aren’t talking about specific wavelengths and frequencies.

                Yes, IR-as-in-thermal is going to be stopped by most glass. IR-as-in-NIR-for-NODs is not. The IR lasers and weapon lights that show up very well with NODs are definitely not visible to the naked human eye, so they’re outside of the visible light spectrum, and get generally labeled as IR, even if they’re outside of the spectrum of IR that’s used by most thermal optics. (It would be interesting to see if a Steiner DBAL could illuminate an area that had low IR for a FLIR camera.) And yes, for that, a red dot sight will work, because it will be set to very, very dim; too dim to be seen by the naked eye.

                • Farid@startrek.website
                  link
                  fedilink
                  English
                  arrow-up
                  2
                  ·
                  5 months ago

                  I’m sorry if I made the false impression that I know what I’m talking about. I’m just discussing and learning as I go. But I went back to the article and looked for the specific figures, and you were right, they are amplifying 1550-nm wavelength, which is NIR. And average glass is usually opaque to wavelength at around 2500nm, so it shouldn’t get blocked. At least not much.

          • notabot@lemm.ee
            link
            fedilink
            English
            arrow-up
            3
            ·
            5 months ago

            The material captures visible light too, so headlights would be brighter, but I wonder if there’s a way to reduce the contrast by either filtering out some wavelengths (like driving glasses) or the material simply not boosting it’s output past a certain level?

            • Farid@startrek.website
              link
              fedilink
              English
              arrow-up
              2
              ·
              edit-2
              5 months ago

              If I understood correctly, it captures visible light to use it for the amplification of the IR spectrum.

              • notabot@lemm.ee
                link
                fedilink
                English
                arrow-up
                2
                ·
                5 months ago

                The article says:

                The photons travel through a resonant metasurface, where they mingle with a pump beam.

                From that, I think it’s suggesting it needs a separate beam of photons to amplify the signal, much like a transistor needs a supply current to amplify the signal it gets.

                They also say:

                This new tech also captures the visible and non-visible (or infrared) light in one image as you look through the ‘lens.’

                Which sounds like it produces an image showing both the IR and visible spectrum in the visible range.

                Mind you, re-readind it, most of the article just talks about IR, so I’m not certain what it’s actually doing. It could just be transparent to the visible spectrum. It wouldn’t be much good for driving if it did that though, the windscreen blocks a lot of IR and you’d need IR headlights!

  • Flipper@feddit.de
    link
    fedilink
    English
    arrow-up
    44
    arrow-down
    6
    ·
    5 months ago

    This isn’t really night vision in the typical sense. It’s an Infrared camera in a thin package.

    Also Military night vision is described wrong. The photon doubled is quite small. The problem is that afterwards the image needs to be turned again. That is done with fiberoptics. Those take the amount of space.

    • magiccupcake@lemmy.world
      link
      fedilink
      English
      arrow-up
      28
      arrow-down
      1
      ·
      5 months ago

      “This is the first demonstration of high resolution up-conversion imaging from 1550-nm infrared to visible 550-nm light in a non-local metasurface," said author Rocio Camacho Morales. "We choose these wavelengths because 1,550 nm, an infrared light, is commonly used for telecommunications, and 550 nm is visible light to which human eyes are highly sensitive. Future research will include expanding the range of wavelengths the device is sensitive to, aiming to obtain broadband IR imaging, as well as exploring image processing, including edge detection.”

      That does not sound like an Infrared camera.

      • Bad_Engineering@fedia.io
        link
        fedilink
        arrow-up
        7
        ·
        5 months ago

        You’re right, there is no capture or recording of light in this system. Electromagnetic metasurfaces directly alter the waveform of photons as they pass through. In this instance it directly converts infrared light into visible 550nm (green) light.

    • notabot@lemm.ee
      link
      fedilink
      English
      arrow-up
      6
      arrow-down
      1
      ·
      5 months ago

      The device captures visible and infrared light, just like a typical night vision scope. They’re working on expanding the spectrum too, which could lead to some interesting and useful results. I understand that, for instance, skin cancers are more visible under certain UV wavelengths, so imagine a doctor being able to just put on a pair of glasses that convert that wavelength to give you a once over during a checkup.

  • Bruno Finger@lemm.ee
    link
    fedilink
    English
    arrow-up
    32
    ·
    5 months ago

    Can’t wait to add this to my transitions blue light filter colour blind prescription smart glasses.

  • HelixDab2@lemm.ee
    link
    fedilink
    English
    arrow-up
    27
    ·
    5 months ago

    First: I’ll believe it when I see it. Every so often pie-in-the-sky claims of this type come out, and they often end up not being feasible, even if they’re technically possible.

    Second: if it is feasible, given that gen 3 night vision tubes have remained stubbornly expensive, I would not expect this to be cheap for a long time.

    • magikmw@lemm.ee
      link
      fedilink
      English
      arrow-up
      12
      ·
      5 months ago

      Who knows. Some tech is both better functionally and cheaper. We’ll see. No need to hype anyway.

    • CheeseNoodle@lemmy.world
      link
      fedilink
      English
      arrow-up
      7
      ·
      5 months ago

      iirc the way night vision currently works the actual amplifying part is incredibly thin and more than 90% of the thickness is post amplification cleanup.

      • HelixDab2@lemm.ee
        link
        fedilink
        English
        arrow-up
        2
        ·
        5 months ago

        I’m pretty sure you’re correct, although I believe that the part that’s capturing photons also needs to be heavily protected from the environment, and you also need something to prevent to many photons from getting to it and burning it out (e.g., almost all gen 3 NODs are autogated so that someone shining a flashlight at you won’t wreck your image intensifier tubes.)

        It’s one of those things that can get pretty overwhelming to try and research as a consumer, because it gets really technical really fast.

  • dogslayeggs@lemmy.world
    link
    fedilink
    English
    arrow-up
    8
    ·
    5 months ago

    I don’t have much to contribute to the technical discussion here, just my comment that even playing with kids toy night vision goggles is awesome. For about $100 you can buy a really fun toy to play around with. Gets boring quickly, but kids might have fun with it longer.