This is a guide to a longer lasting Android device, from choosing one to how to preserve the life of the one that you have.

Choosing a long-lasting and repair friendly phone:

To get the best shot at longevity, start with a high quality device from a manufacture with a history of long term device support, and one that regularly releases there modifications to the kernel source code. A device that has an unlockable bootloader (XDA developers Forums is a good place to see about ROM support), and is user repairable (See iFixit’s Smartphone Repairability Scores) will allow you to keep the software & hardware going the longest. Both the Google Pixels, and Fairphone’s line are a good place to start. Fairphone is the USA is sold though Murena

Before you use your phone

  • Get a good sturdy case like an Otterbox
  • Apply a screen protector. I recommend Glass, Sapphire is the best (but very expensive).

Battery

Lithium-ion (LI-on) battery’s wear out faster when near the upper and lower charge levels (read why here: Battery University), so avoid charging or discarding the battery fully, aiming for around 20~80% is a good target.
Never leave your phone in a hot car or in the Sun, extreme heat exposure reduces the lifespan of the battery & is generally bad for other components.

Charging

  • Avoid fast & wireless charging by using a older charging block that only outputs a few(1~2) Amps. (to reduce the heat the battery endures)
  • Use a magnetic charging cable to reduce the wear on the plug (Like Volta), you need a bulky case to have it flush to not make the phone uncomfortable to hold though. 
  • When/If you use a regular charging cable don’t move the phone around when it’s plugged in, movement wears the plug much sooner.
Use a charge limiting feature. (Listed in order of recommendation.)
  1. If your phone has a built smart battery charge management feature, use that. (Most modern high end phones do, including Samsung’s, Google’s & Apple’s)

  2. If you have Root; use ACCA(a GUI for ACC) (Suggested Charging config: Level limit: 85%, Current: 700mA, Voltage: 3800mV)

  3. Buy a switch that can wirelessly cut off power based on charge level:

  • A Chargie by Lighty Electronics is a Bluetooth enabled USB-A power switch, the accompanying APP configures it to auto cut off power based on power draw or charge level. Note that in the newest Android versions/PlayStore restrictions prevent versions of the APP past v2.2.20 from auto enabling Bluetooth, making this solution a little less appealing as you have to leave Bluetooth on you manually enable it.
  • Using an Automation APP like Tasker to turn off a Home Assistant-controlled smart plug when the battery exceeds a reprogramed threshold, is a more reliable method & works for any device.
  1. Install an APP that alerts you at charge levels so you can unplug you phone. (AccuBattery, Battery Guru: Monitor & Health, etc.

Waking & Locking the screen

To reduce the use of the power button, as it’s a fail point, although less common.

To wake 

 1. Use the features “Lift to check phone/events” and “Double-Tap to check phone”

 2. Use the fingerprint reader to wake and unlock.   

To lock/turn off the screen  

 1. Use a launcher that support double tapping the home screen to lock it (Nova launcher, Smart launcher, etc.)

 2. Use Googles Quick Tap feature if you have a Pixel or the APP Tap, Tap for any Android to lock the screen. (Note: battery life might suffer)  

 3. Use a short Screen Time out.

TIPS
  • Get a new case to get a fresh look and feel when your tired of the one you have.
  • Read through the comments! There are many good additions from people with different experiences & perspectives.

Edit’s: Updated & reformatted several things based on comments <3

  • 𝒍𝒆𝒎𝒂𝒏𝒏@lemmy.one
    link
    fedilink
    English
    arrow-up
    26
    ·
    11 months ago

    Really like this!

    Only one additional thing that came to mind - get a phone with lots of storage! My two previous Android devices died as a result of EMMC failure, and they had a pretty small onboard capacity (16GB, and 32GB)… my current device is 64GB and I now keep most of my data on a 512GB sd card.

    Lots of empty storage space allows the EMMC firmware to perform wear levelling as needed, prolonging the life of this non-replaceable component. Most well-designed Android devices also run a “TRIM” on the internal EMMC storage when the device is idle, a kind of self-maintenance procedure that allows the firmware to keep track of how much space is unoccupied.

    For Android users who are curious about the details (or have rooted devices and want to run a trim manually) see here

    • Reddit_refugee7834@lemmy.todayOP
      link
      fedilink
      English
      arrow-up
      12
      ·
      edit-2
      11 months ago

      Thank’s for the advice, and being the first replay to my first post! I’ve retired from Reddit and hope to add value to society without supporting as many companies I disagree with. :)